Cortadora eléctrica DC-250 SMART ADVANCE 1200 230V 50Hz

The RUBI DC-250 SMART ADVANCE is a professional electric movable-head tile cutter designed for cutting porcelain tile, glazed tile, and other ceramic materials. Its key feature is the SMART ADVANCE intelligent automatic feed system, which electronically analyzes cutting force and adapts the machine’s operation to the material, thickness, and behavior of the blade to ensure uniform cuts, reduce operator intervention, and maximize blade performance.

The DC-250 SMART ADVANCE can operate in either manual or automatic mode. In automatic mode, it uses an integrated electronic system that continuously analyzes power consumption during cutting and adjusts the feed rate based on the resistance encountered by the blade.

Operating modes

Manual and automatic

Automatic levels

4

Control

SMART ADVANCE Electronic

Use

Professional

RUBI Category

SUPERPRO

The analysis process occurs continuously during cutting. The system takes into account the resistance of the tile, the blade’s actual performance, and the parameters corresponding to the selected level to determine an appropriate feed rate.

The four performance levels allow for different prioritization of cutting speed and finish quality. This enables the machine to be adapted to different jobs without relying solely on the pressure or speed manually applied by the operator.

• Automatically adjusts feed rate to the difficulty of the cut
• Takes into account the material and its thickness
• Analyzes the blade’s performance during operation
• Maintains a more uniform feed rate
• Helps achieve consistent finishes
• Reduces the need to manually control the feed rate
• Promotes better blade utilization
• Helps reduce blade dulling
• Also allows for manual operation

The SMART ADVANCE control system incorporates a built-in protection system that can stop the motor and the blade when it detects situations such as a jam or blade dulling that causes an abnormal load.

This protection is particularly important in an automatic feed machine, as it allows the machine to respond to excessive resistance without relying solely on immediate user intervention.

Electronic protection

Integrated

Cutting overload detection

Yes

Motor and blade shutdown

Automatic in certain situations

The DC-250 SMART ADVANCE features a 1.1 kW or 1.5 CV induction motor with belt drive. The assembly is mounted on slide bearings designed to provide precision and reliability during head movement.

Power

1.1 kW

Equivalent power

1.5 CV

Motor type

Induction

Drive

Belt drive

Power supply (Spanish version)

230 V / 50 Hz

Speed

2790 rpm

Electrical protection

IP55

IP55 protection provides protection against the ingress of harmful amounts of dust and against water jets in accordance with the degree of protection specified for the equipment. This does not mean that the machine can be submerged or used in a manner that disregards electrical safety instructions.

The machine provides a straight-cut length of 108 cm in conventional configuration. Using the miter cut function, the maximum longitudinal capacity increases to 121 cm.

Straight-cut length

108 cm

Miter cut

121 cm

Maximum diagonal cut size

85 × 85 cm

Maximum thickness in a single pass

61 mm

Maximum thickness in two passes

90 mm

Maximum miter thickness

55 mm

Miter thickness with special supports

50 mm

The miter saw function allows you to adjust the height of the head and make vertical cuts by lowering the blade onto the tile. In addition to increasing the longitudinal capacity in certain operations, this system facilitates jobs where you do not want to start the cut from one end of the tile.

The movable head can be raised and lowered over the tile, allowing you to adjust the cutting height and make vertical cuts. This configuration expands the machine’s capabilities compared to an electric tile saw, where the head always remains at a fixed height.

Cut-off saw function

Yes

Adjustable head height

Yes

Vertical cuts

Yes

Maximum thickness in two passes

90 mm

The cutting assembly can be tilted up to 45° to make mitre cuts. The published maximum mitre capacity is 55 mm, although RUBI specifies 50 mm when using certain special supports.

Head tilt

Up to 45°

Mitre cuts

Yes

Maximum mitre thickness

55 mm

The DC-250 SMART ADVANCE uses RUBI’s C3 Python cooling system to supply water to the blade during cutting. The cooling system helps control the blade’s temperature, remove debris from the contact area, and maintain optimal cutting conditions.

Cooling System

C3 Python

Water Pump

50 W

Adjustable Flow Rate

Yes

Anti-Splash System

Yes

The ability to adjust the flow rate allows the water supply to be tailored to the needs of the job. Keeping the cooling circuit properly operational is especially important during prolonged cuts and when working with hard materials.

The machine incorporates RUBI’s patented ZERO DUST system, developed to reduce the user’s exposure to respirable dust particles generated during cutting operations.

Dust control system

ZERO DUST

Water-cooled cutting

Yes

The DC-250 SMART ADVANCE comes configured with a 250 mm CPX PRO diamond blade, specifically designed by RUBI for cutting porcelain tile.

Included Blade

CPX PRO 250

Outer Diameter

250 mm

Inner diameter

25.4 mm

The machine is compatible with suitable 250 mm blades that meet the manufacturer’s specifications for diameter, shank, and application. The choice of blade directly affects the speed, finish, and performance of the automatic system.

• J-SLOT CPX-250 PRO for porcelain tile, ref. 30962
• SPT 250 mm PREMIUM, ref. 32934
• SPL 250 EXT SUPERPRO, ref. 40910

The blade should be selected based on the material to be cut. A blade specifically designed for porcelain tile may behave differently from one intended for other materials, and the SMART ADVANCE system also adapts its operation based on the actual response it receives from the blade during cutting.

RUBI recommends that all four levels of the SMART ADVANCE system can be used for tiles approximately 12 mm thick.

Approximate thickness

12 mm

Available levels

1, 2, 3, and 4

The specific level chosen will depend on the desired balance between speed and finish, as well as the particular characteristics of the material and the installed blade.

For tiles approximately 20 mm thick, RUBI recommends considering both the hardness of the material and the blade used. The manufacturer specifically mentions the SPT blade for this type of application.

For low- or medium-hardness materials, levels 1, 2, or 3 can be used. For hard tiles, RUBI recommends working at level 1 or using manual cutting mode.

20 mm low/medium-hardness tile

Levels 1, 2, or 3

Hard 20 mm tiles

Level 1 or manual mode

Blade recommended by RUBI

SPT

The machine features an adjustable aluminum square guide with a side stop to position the pieces and facilitate repeat cuts. It allows for cutting at 0° and 45°.

Square guide material

Aluminum

Side stop

Yes

Repetitive cuts

Yes

Main angles

0° and 45°

Ruler

Inch/mm scale

This configuration is especially useful when multiple pieces of the same size need to be cut, eliminating the need to mark each tile individually before cutting.

The frame features a reinforced steel chassis designed to withstand the demands of professional use and provide corrosion resistance.

Chassis

Reinforced steel

Cutting head

Movable

Legs

Foldable

Wheels

Built-in

Working height

85 cm

The folding legs and wheels facilitate the setup and movement of a machine with an approximate net weight of 65 kg.

Net weight

65 kg

Dimensions in use

162 × 82 × 131 cm

• Professional cutting of porcelain tile
• Cutting of glazed tile
• Cutting of ceramic tile
• Cutting of other compatible materials
• Straight cuts
• Diagonal cuts
• Repetitive cuts
• Vertical cuts with a cut-off saw effect
• Mitre cuts up to 45°
• Automatic operation with intelligent feed
• Manual feed operation
• Cutting of large-format pieces
• Version for Spain

For the Spanish market, RUBI markets the DC-250 SMART ADVANCE 1200 with a 230 V, 50 Hz power supply under part number 53913. This is the appropriate version to include as the main model in the Almacenes Ferragut catalog.

DC-250 SMART ADVANCE 1200 230V 50Hz · Ref. 53913 · EAN 8413797539134

Power supply

230 V / 50 Hz

Speed

2,790 rpm

Power

1.1 kW / 1.5 CV

Cutting length

108 cm

Cutting length with miter function

121 cm

Maximum diagonal

85 × 85 cm

Thickness in a single pass

61 mm

Thickness in two passes

90 mm

Mitre cut

Up to 55 mm

Blade

Ø250 mm

Blade shaft

Ø25.4 mm

Net weight

65 kg

Electrical protection

IP55

Water pump

50 W

RUBI also manufactures electrical configurations designed for other markets. They share the fundamental architecture and capabilities of the DC-250 SMART ADVANCE, but use different voltages and frequencies; therefore, they should not be considered interchangeable without first checking the available electrical installation.

110 V / 50 Hz

Ref. 53910 · EAN 8413797539103

120 V / 60 Hz

Ref. 53911 · EAN 8413797539110

220 V / 60 Hz

Ref. 53912 · EAN 8413797539127

230 V / 50 Hz

Ref. 53913 · EAN 8413797539134

• Table extension with rollers DV/DW-N/DC/DS/DX, Ref. 51914
• RUBI table extensions, Ref. 57941
• J-SLOT CPX-250 PRO cutting disc, part no. 30962
• SPT 250 mm PREMIUM cutting disc, part no. 32934
• SPL 250 EXT SUPERPRO blade, part no. 40910

Table extensions allow you to increase the support surface when working with larger workpieces, while the range of compatible blades enables you to adapt the machine to different materials and finishing requirements.

Since this is a water-cooled electric cutter, it is important to keep the work area, the water circuit, and the moving parts clean. Before starting to cut, ensure that the blade is in good condition, properly installed, and suitable for the material.

You should also maintain sufficient coolant flow and avoid working with a blade that is excessively worn, dull, or unsuitable. Although the electronic system includes protection against certain abnormal conditions, proper maintenance remains essential to ensure precision and maintain the machine’s performance.