Termoarcilla 24

Termoarcilla 24 by Ladrillerías Mallorquinas is a 24-cm-thick lightweight ceramic block designed for building sturdy walls and thicker exterior walls. Its tongue-and-groove vertical joint facilitates the alignment of the blocks and reduces the number of vertical mortar joints, while the horizontal joints are filled with cement mortar.

It can be used in load-bearing walls, exterior walls, and partition walls between Type 2B dwellings in the Silensis System. The product is certified by the manufacturer for load-bearing walls and includes special blocks to address key challenges in masonry construction.

Its 24 cm width allows for the construction of walls with a larger cross-section than the 14 and 19 cm models. This feature makes it a suitable alternative for projects where the ceramic wall itself must play an important role in the structural, thermal, or acoustic solution, always subject to the corresponding technical verification.

Dimensions

24 × 19 × 30 cm.

Approximate coverage

16 blocks per m².

Packaging

60 blocks per pallet.

Approximate weight

9,500 kg per unit.

Uses

load-bearing walls, exterior walls, and Type 2B partitions in the Silensis System.

Corner block

24 × 19 × 40 cm.

End block

24 × 19 × 30 cm.

Half vertical block

24 × 19 × 15 cm.

Tie block

24 × 19 × 24 cm.

Modulation blocks

combination of 24 × 19 × 5 cm and 24 × 19 × 10 cm.

Half horizontal piece

24 × 9 × 30 cm.

The complementary pieces allow the system’s modular continuity to be maintained at corners, wall ends, openings, and horizontal reinforcements. During installation, avoid improvisations that alter the tongue-and-groove joints or the intended geometry of the assembly.