Stop moho protection x5

CEYS Stop Moho Blanco is a single-component, acetyl-curing silicone sealant specifically designed for joints that are routinely exposed to high humidity. It is suitable for sealing bathtubs, showers, shower enclosures, toilets, sinks, countertops, sink bases, and other common joints in bathrooms and kitchens. Its controlled-release technology progressively protects the bead against the growth of microorganisms, helping to delay blackening caused by mold.

The silicone has an approximate density of 1 g/cm³ and forms a skin in 5–8 minutes at 23 °C and 50% relative humidity. Its cure depth reaches approximately 3 mm in 24 hours, and it can come into contact with water after about 30 minutes. Once cured, it operates between -30 and +120 °C, has a Shore A hardness of 17, an approximate tensile strength of 0.74 MPa, and an elongation at break of 673%, maintaining a flexible and elastic seal.

It adheres to ceramic, tile, stoneware, porcelain, glass, aluminum, PVC, and other compatible substrates. Surfaces must be completely dry, clean, and free of grease or residues of old silicone. It is applied with a caulking gun and smoothed before a skin forms. CEYS recommends waiting 12 hours before exposing the joint to high-pressure water and approximately 24 hours for complete curing. Do not use on mirrors or substrates sensitive to acid curing.