Aguaplast Standard Cima

Aguaplast Standard Cima is a ready-to-use white putty designed for plastering, smoothing, and leveling interior walls in a thin layer. It is suitable for preparing new walls, preparing surfaces after removing wallpaper, and repairing small chips, cracks, and scratches before painting or wallpapering. It can be applied to absorbent substrates such as plaster, drywall, cement, concrete, wood, and non-elastic, absorbent, or matte acrylic paints.

It is formulated with 100% bio-based natural resin, mineral fillers, and additives. It is white in color, has an approximate density of 1.7 g/cm³, a pH between 8 and 9, and a fine particle size of less than 100 µm. It is classified according to UNE-EN 16566 as G3S1V0W0A0C0R0. It produces very smooth surfaces that are easy to sand and ready for subsequent painting.

Apply directly from the container, undiluted, using a trowel or putty knife. The maximum recommended thickness is 2 mm per coat, and the approximate coverage is 1.75 kg/m² per millimeter. At 20 °C, it dries in approximately 24 hours per millimeter. It must be applied at temperatures between 5 and 35 °C on firm, dry, and clean surfaces. Do not apply when relative humidity exceeds 70%, or on damp surfaces or those subject to constant moisture.