Sika Boom®-405 Water Stop

CONSTRUCTION MATERIALS

Fast-curing two-component foam for sealing pipe penetrations and joints subjected to water pressure.

Sika Sika Boom®-405 Water Stop · SikaAmpliar

Description

Waterproof Sealing

Sika Boom®-405 Water Stop is a two-component, self-expanding, and very fast-curing polyurethane foam. Its high density and fine, predominantly closed-cell structure allow it to create water-resistant seals without relying on ambient moisture to cure.

Above- and Below-Ground Applications

It is suitable for sealing pipe and duct wall penetrations, cable conduits, pipe connections, precast concrete elements, and pipe plugs up to 200 mm in diameter. It can be used both indoors and outdoors and has been tested against water pressures of up to 1 bar.

Application and Limitations

The 320-ml container allows you to pause and resume application by changing the nozzle. The foam is touch-dry in about 3 minutes and can be cut after approximately 5 minutes. It must not be used in contact with drinking water, with continuously flowing water, as a structural fastener, or on components subject to vibration.

Warehouse opportunities

You may also be interested in our outlet

Limited-stock items at special prices, available while stocks last.

View the full outlet

Choose with confidence

Need to confirm suitability, quantity or availability?

Our team can review the surface, intended use and alternatives with you before preparing the order.