General Description

Termoarcilla 29 is the thickest block in this series from Ladrillerías Mallorquinas. It is a lightweight ceramic block with vertical tongue-and-groove joints, which is installed using cement mortar in the horizontal joints to form walls 29 cm wide.

It is designed for constructing load-bearing walls, exterior walls, and partition walls between Type 2B dwellings in the Silensis System. The manufacturer certifies it for load-bearing walls and offers a complete line of auxiliary components to address wall junctions and unique points.

Its thickness allows for the construction of large-section ceramic masonry with a single main course. Compared to the 14-, 19-, and 24-cm variants, it offers a wider wall, although it also entails a greater weight per unit and a smaller number of units per pallet. The choice of this format must align with the performance specifications and dimensions defined in the project.

Technical Specifications

Dimensions: 29 × 19 × 30 cm.

Approximate coverage: 16 pieces per m².

Packaging: 45 pieces per pallet.

Approximate weight: 11.500 kg per unit.

Installation: vertical tongue-and-groove joint and horizontal cement mortar.

Special pieces available

Corner piece: 29 × 19 × 15 cm.

End piece: 29 × 19 × 30 cm.

Half vertical block: 29 × 19 × 15 cm.

Ring block: 29 × 19 × 24 cm.

Modulation blocks: combination of 29 × 19 × 5 cm and 29 × 19 × 10 cm.

Half horizontal piece: 29 × 9 × 30 cm.

The weight and dimensions of the pieces require proper planning for their handling, storage, and installation. To maintain the system’s performance, the corresponding special pieces must be used, and the Termoarcilla installation recommendations published by the manufacturer must be followed.