Montante C 90/40/0,6
Upright Profile for Vertical Systems
Description and Details
The studs serve to support the panels and absorb the stresses inherent to their components, without any external load-bearing function. The studs are used vertically for the installation of self-supporting wall systems and partitions, as a framework for securing laminated gypsum panels. They come in various widths, all of which are 1 mm narrower than the channels, allowing them to be inserted into the channels. Not recommended for standard ceilings.
Product Properties
The profiles are made of galvanized steel sheet, type DX51D (Fe Po 2 G), with a minimum coating of Z-140 g/m².
Standard star pattern (N) and ordinary finish A (all in accordance with UNE EN 14195)
The nominal thickness is 0.6 mm (+0.05) for vertical load-bearing elements (studs and headers)
Applications
They are used in wall linings, partitions, and other drywall construction elements as a framework for attaching gypsum board and comply with the UNE EN 14195 standard.